The main component of the slurry: chromium oxide, alumina, iron oxide red, feldspar powder and other materials. Made of different matrix composition and requirements of different fineness and variety. Liquid polishing wax, polishing wax with the new blog of the East exhibition similar! Machining processes can be divided into four kinds: coarse polishing abrasive in polishing a fine polishing edit this paragraph, liquid polishing wax advantages, increased production capacity, operators no longer need to interrupt the polishing work, and can automatically control the spraying of the slurry, 2, save time and increase productivity. , Saving cleaning time, the slurry is water-based formula, polished after the cleaning process of the project more easily, can save cleaning time polishing wheel life increase, the spray liquid abrasive grinding wheel rim surface temperature of the cooling effect. greatly reduce the loss of the grinding wheel, thereby increasing the life of the grinding wheel. 6, increase product stability, to avoid the uncertainty of the manually operated. Edit this paragraph, liquid polishing wax process. Polishing the slot can be used ordinary steel production, need to brush the inner surface of acid resistant coatings, welding the outer surface of embedded heat sink, and then the slot into the cooling tank. Coolant from the mains phase to avoid wastage and wash tank. Two. Workpiece to be polished in the jitter process, the workpiece overlap should be avoided, necessary, to add gauze separated. 3. Filter: refers to the loop filter. Diaphragm can be PP, filter, two sets of filter, a set of use, another set of cleaning an alternate. Without filtering the reaction products, any of its attached to the workpiece surface will affect the final brightness. 4. Frequent cleaning of the sediment in the slurry; absolutely do not allow metal objects out in the slurry, otherwise it will result in the waste slurry thus invalid.